No image available
No image available
Your request is being processed.
Home
Products
Applications
Contact Us


Amersham ECL Semi-Dry Blotters

Gel Size 21 x 26 cm
Built-in Power No

Overview Product Data Related Documents Related Products Product Support

TE 77 Semi-Dry Transfer Unit, 21 × 26 cm

ECL Semi-Dry Blotters are designed to deliver outstanding electrophoretic transfer results using low current and voltage with a minimal amount of buffer. Units are available with and without built-in power supplies to give maximum flexibility.

  • Tested for use with Amersham ECL Western blotting reagents
  • Transfer two polyacrylamide gels in a stack.
  • Long-lasting perforated platinum-titanium and stainless steel electrodes give uniform, contamination-free transfers.
  • Use low current and voltage for transfers.
  • Units are available with or without power supply.
  • Electrotransfer proteins from polyacrylamide gels in less than 1 h in newly designed, state-of-the-art units.
  • Use minimal buffer, only enough to saturate blotting papers and membranes.

TE 70 Semi-Dry Transfer Unit is suitable for gels up to 14 × 16 cm, such as from SE 400 and SE 600 Ruby electrophoresis units or from two miniVE gels side-by-side. TE 77 Semi-Dry Transfer Unit accepts gels up to 21 × 26 cm or four side-by-side mini-gels.

TE 70 PWR and TE 77 PWR come with a built-in power supply and offer an automatic stopping feature. When the buffer becomes depleted, the transfer is stopped automatically, saving the transfer before overheating. This safety feature resets automatically when the power is turned off. In addition, safety is assured as the unit is limited to 30 V.

TE 77 Semi-Dry Transfer Unit, 21 × 26 cm

Application Designed to deliver outstanding electrophoretic transfer results using low current and voltage with a minimal amount of buffer
Output Current 0.5 A
Output Voltage 30 V
Recommended Power Supply EPS 301
Depth 46 cm
Compliance The product fulfills valid directives and standards when used within the conditions specified in the user manual. The product must also be used in the same state as it was delivered from GE Healthcare and connected only to other CE labeled GE Healthcare modules or other products as recommended. For regulatory details please see declaration of conformity.
Height 9 cm
Weight 3.7 kg
Width 38 cm
Includes 25 sheets of blotting paper, 50 sheets of cellophane, solid mask and mask for 14 x 16 cm gels.
Operating Conditions Indoor use: 4 – 40°C
operating conditions: Humidity up to: 80%
Altitude up to: 2000 m
Installation category: II
Pollution degree: 2
Complete Packsize 1 Piece

TE 77 Semi-Dry Transfer Unit, 21 × 26 cm



Feedback Form